Blade Sharpening

Surface Grinder

To keep your equipment running as efficiently as possible it is necessary to have sharp cutting edges.  That is why it is important to consistently rotate the blades on your wood chipper.  At High-Tech we have the equipment needed to make sure your blades are sharp when you need them.  Bring your equipment or blades to our location in Charleston, SC and we will have them sharp and ready to go for your next job.  We also accept blades to be sharpened if your are located out of town.  Contact us and we will help arrange the shipping.

Tubes N Hoses

tubenhoses machine

At High-Tech Hose and Hydraulics we have the ability to make custom bent hydraulic steel lines through the use of our Tubes N Hoses machine.  Each station on the machine provides us with the tooling to crimp hoses to a steel line, form the steel tube to virtually any fitting, and bend the steel lines in any direction.  It is the one stop station for all applications that require a steel bent tube. This Machine can bend and flare steel lines from 1/4″to 1-1/4″ OD.

Ultra Clean

Don’t let contamination be the reason why your equipment breaks down!  Did you know that most new hose assemblies are not properly cleaned before installation causing your system to work 20% slower over time (that’s losing 1 day out of every 5 days of work!!!).  This can happen without the operator even noticing it due to the gradual change in operation speed.  It is often noticed when it is too late.  The good news is High-Tech has a solution of preventing this before it even occurs.  This is done through our Ultra Clean machines.  We highly recommend using this service to avoid any unwanted contamination in your system.  The process involves launching 3 foam projectiles through your hose assembly and then shrink sealing the ends shut.  This allows the assembly to remain clean until installation.

Custom Seal Kits

Stop by our shop located in Charleston, South Carolina and we will build a custom seal kit to get you everything you need to reseal your cylinders and hydraulic components. Just bring the parts that need seals to the shop or provide the equipment information and we will take care of the rest.